Backup Light Bulb: Service and Repair

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove screws holding back up lamp to bumper.
3. Separate back up lamp from bumper.
4. Rotate bulb socket counterclockwise one quarter turn.
5. Pull bulb socket from back of lamp.
6. Pull bulb from bulb socket.

INSTALLATION
1. Push bulb into bulb socket.
2. Push bulb socket into back of lamp.
3. Rotate bulb socket clockwise one quarter turn to stop.
4. Position back up lamp into opening on bumper.
5. Install screws to hold back up lamp to bumper.
6. Connect the battery negative cable.