Front Door Window Glass: Service and Repair

REMOVAL
1. Remove door trim panel and plastic air shield.
2. Align fasteners (17), (18), and (19) with access holes in door inner panel and remove fasteners.
3. Lower window until lift channel (5) is accessible through access hole, disengage lift channel from glass studs and lower glass to bottom of door.
4. Remove outer belt weatherstrip by disengaging spring clip tabs from door panel slots.

Glass Through Belt Opening:

5. Remove glass assembly through belt opening.

INSTALLATION
1. Lower glass through belt opening to bottom of door.
2. Install outer belt weatherstrip.
3. Position glass assembly to lift plate and attach fasteners (17), (18), and (19).
4. Adjust glass. Refer to Adjustments.
5. Cement plastic air shield to door inner panel.
6. Install door trim panel.