Low Pressure Cycling Clutch Switch Replacement

REMOVAL AND INSTALLATION

Cycling Clutch Switch:

1. Locate and disconnect the two pin connector at the cycling clutch switch.
2. Remove one (1) attaching screw on the refrigerant line manifold plate at the expansion H-valve.
3. Carefully separate the switch from the refrigerant manifold and slide the capillary tube rearward and out of the capillary tube well on the suction line. The capillary tube well is filled with a special temperature conductive grease, try to save all of the special grease and reuse it when installing the switch.

To install, reverse the preceding operation.