Front Door Window Motor: Service and Repair

Glass Guidance System:

WARNING: Electric window regulator motors should only be removed from doors with an intact glass guidance system and with glass secured in the full up position. If the regulator arm is not loaded by the weight of the glass, removal of the motor will result in a sudden release of counter balance spring energy which may result in injury.

REMOVAL
1. Remove trim panel and plastic air shield.
2. Disconnect electric motor from harness.
3. Remove 3 regulator attaching screws.
4. Remove motor through large access hole.

INSTALLATION
1. Lift glass to full up position.
2. Install motor through large access hole in inner panel.
3. Secure motor in place.
4. Connect the motor to wiring harness.
5. Install plastic air shield and trim panel.