Diagnostic Mode

To enter diagnostic mode, a vehicle speed must be below 10 km/h (6 mph) and no ABS condition present. If vehicle speed is not below 10 km/h (6 mph), a "No Response" message could be displayed by the DRB III (R)(R). The following are characteristics of diagnostic mode:
- he amber ABS warning indicator will blink rapidly (about 1/2 second ON and 1/2 second OFF). If a hard trouble code, such as CAB Power Feed Circuit Failure code is present, the indicator will be illuminated without blinking until the trouble condition is cleared
- Antilock operation is disabled
- You will be unable to actuate the valves in the valve body when the vehicle speed is above 8 km/h (5 mph). If valve actuation is attempted above 8 km/h (5 mph), a "No Response" message will be displayed on the DRB III (R).