System Specifications

Rear ride height should be measured with the vehicle empty, all fluids at proper capacity, correct tire pressure and on a flat surface.

Fig. 2 Rear Ride Height Measurement Points:

Refer to Fig. 2 for ride height measurement points.

1. Heights H1 and H2 are measured between the ground and the sill edge, near holes a1 and a2.
2. Bounce the car before each measurement to ensure no suspension parts are binding.
3. Take three measurements on each side, then calculate the average of the measurements.
4. The difference between the two sides H1 and H2 must not exceed 10 mm.