Transmission Mount Replacement- Front
Transmission Mount Replacement- FrontRemoval Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting
2. Support the engine with a jackstand and a block of wood.
3. Remove the mount thru bolt.
4. Remove the lower mount bracket bolts and the lower mount bracket.
5. Remove the front transmission mount bolts and the front transmission mount.
Installation Procedure
Notice: Refer to Fastener Notices in Service Precautions
1. Position the front transmission mount and install the bolts.
^ Tighten the bolts to 130 Nm (96 ft. lbs.).
2. Position the lower transmission mount bracket and install the bolts.
^ Tighten the bolts to 120 Nm (89 ft. lbs.).
3. Install the transmission mount thrubolt.
^ Tighten the thrubolt to 75 Nm (55 ft. lbs.).
4. Remove the jackstand and the wood block.
5. Lower the vehicle.