Interior Moulding / Trim: Service and Repair

Coat Hook Replacement

Removal Procedure




1. Use a small flat-bladed tool to remove the coat hook to roof retaining screw cover.
2. Remove the coat hook to roof retaining screw (1).
3. Remove the coat hook (2) from the headliner.


Installation Procedure




1. Position the coat hook (2) to the headliner.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the coat hook to roof retaining screw (1).

Tighten the coat hook to roof retaining screw to 2 N.m (18 lb in).

3. Align the coat hook to roof retaining screw cover to the coat hook. Apply force until fully seated.