Instrument Panel (IP) - Multifunction Switch Assembly Replacement

REMOVAL PROCEDURE




1. Remove the instrument panel steering column opening filler. Refer to Steering Column Filler Replacement.
2. Remove the screws from the switch bank.
3. Disconnect the electrical connectors from the switch bank.

INSTALLATION PROCEDURE




1. Connect the electrical connectors to the switch bank.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the screws to the switch bank.

Tighten
Tighten the switch bank screws to 2 N.m (18 lb in).

3. Install the steering column opening filter. Refer to Steering Column Filler Replacement.