A/T Range Selector Cable Replacement (at PNP Switch)

Removal Procedure





Caution: Refer to Automatic Transaxle Range Selector Cable Caution in Service Precautions.

1. Remove the throttle body air inlet duct. Refer to Air Cleaner Intake Duct Replacement in Powertrain Management.
2. Remove the automatic transaxle range selector cable from the wiring harness clip or strap.





3. Remove the automatic transaxle range selector cable from the automatic transaxle range selector lever.





4. Remove the automatic transaxle range selector cable from the automatic transaxle range selector cable bracket.
5. Remove the automatic transaxle range selector cable from the console shift control. Refer to Automatic Transmission Range Selector Cable Replacement (At PNP Switch) or Automatic Transmission Range Selector Cable Replacement (At Shift Control) or Automatic Transmission Range Selector Cable Replacement (New Cable Installation)
6. Pull the automatic transaxle range selector cable through the dash from the engine compartment side.

Installation Procedure





Caution: Refer to Automatic Transaxle Range Selector Cable Caution in Service Precautions.

1. Insert the automatic transaxle range selector cable through the dash from the engine compartment side.
2. Install the automatic transaxle range selector cable to the automatic transaxle range selector cable bracket.





3. Install the automatic transaxle range selector cable to the automatic transaxle range selector lever.
4. Install the automatic transaxle range selector cable to the wiring harness clip or strap.
5. Install the automatic transaxle range selector cable to the console shift control. Refer to Automatic Transmission Range Selector Cable Replacement (At PNP Switch) or Automatic Transmission Range Selector Cable Replacement (At Shift Control) or Automatic Transmission Range Selector Cable Replacement (New Cable Installation).
6. Adjust the automatic transaxle range selector cable. Refer to Automatic Transmission Range Selector Cable Replacement (At PNP Switch) or Automatic Transmission Range Selector Cable Replacement (At Shift Control) or Automatic Transmission Range Selector Cable Replacement (New Cable Installation) and/or Automatic Transmission Range Selector Cable Adjustment





7. Install the throttle body air inlet duct. Refer to Air Cleaner Intake Duct Replacement in Powertrain Management.