Cylinder Bore Specifications
| Cylinder Bore Diameter | 3.5430 - 3.5435 |
| Out Of Round Maximum | 0.0004 |
| Runout Rear Face Of Block To The Crankshaft, Center Line Maximum | 0.002 in |
| Taper Maxium Top To 4.173 in Down | 0.0003 |
| Cylinder Bore Diameter | 3.5430 - 3.5435 |
| Out Of Round Maximum | 0.0004 |
| Runout Rear Face Of Block To The Crankshaft, Center Line Maximum | 0.002 in |
| Taper Maxium Top To 4.173 in Down | 0.0003 |