Instrument Panel Storage Compartment - Replacement

REMOVAL PROCEDURE

CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.

1. Disconnect the negative battery cable.
2. Remove the accessory trim plate.
3. Remove the screws securing the center compartment (3).
4. Remove the center compartment (3).
5. Disconnect the electrical connector.

INSTALLATION PROCEDURE
1. Connect the electrical connector.
2. Install the center compartment (3).
3. Install the screws in order to secure the center compartment (3).
4. Install the accessory trim plate.
5. Connect the negative battery cable.