Troubleshooting Hints

1. Check I/P Junction Block RAC/TRUNK REL FUSE 2 by visual inspection.
2. Check I/P Junction Block RETAINED ACCESSORY POWER RELAY by visual inspection.
3. Check I/P Junction Block PWR WINDOW/SUNROOF RELAY by visual inspection.
4. Check RH MaxiFuse(R) Block IGN SW FUSE by visual inspection.
5. Check RH MaxiFuse(R) Block PWR WDO/SR CIRCUIT BREAKER by visual inspection.
6. Check I/P Fuse Block IGN (RUN/CRANK) CHIME/CLSTR/LCM FUSE 1D by visual inspection.
7. Check I/P These Block RADIO FUSE 8D by visual inspection.
8. Check I/P Fuse Block WPR/WSHR FUSE SE by visual inspection.
9. Check I/P Fuse Block PWR SUNRF CIRCUIT BREAKER by visual inspection.
10. Make sure G201 is clean and tight.
11. Make sure G202 is clean and tight.
^ Check for a broken (or partially broken) wire inside of the insulation which could cause system malfunction but prove "GOOD" in a continuity/voltage check with a system disconnected. These circuits may be intermittent or resistive when loaded, and if possible, should be checked by monitoring for a voltage drop with the system operational (under load).
^ Check for proper installation of aftermarket electronic equipment which may affect the integrity of other systems.
^ Refer to System Diagnosis.