Fluid Pump: Service and Repair

REMOVAL PROCEDURE





1. Remove the case side cover.
2. Remove the oil pump bolts/screws (205-207).

NOTICE: Do NOT remove the three bolts which hold the pump together.





3. Remove the oil pump (200) from the valve body (300).
4. Inspect the oil pump.

INSTALLATION PROCEDURE





1. Install the oil pump (200) to valve body (300).





2. Install the automatic transaxle oil pump bolts/screws (205-207).
^ Tighten the M6 X 1.0 X 20 bolt to 8 Nm (70 inch lbs.).
^ Tighten the M6 X 1.0 X 85 bolt to 12 Nm (106 inch lbs.).
^ Tighten the M6 X 1.0 X 95 bolt to 16 Nm (11 ft. lbs.).

NOTICE: Refer to Fastener Notice in Service Precautions.

3. Install the case side cover.