Instrument Panel Cluster Indicator Lamp Replacement

REMOVAL PROCEDURE
1. Remove the Instrument panel (IP) cluster.
2. Using a small flat-bladed screwdriver, carefully release the IP cluster backing plate retaining tabs.
3. Remove the cluster backing plate.
4. Rotate the appropriate cluster indicator lamp socket(s) counterclockwise to release.
5. Remove the bulb(s) from the indicator lamp socket(s).

INSTALLATION PROCEDURE
1. Install the bulb(s) to the IP cluster indicator lamp socket(s).
2. Install the cluster indicator lamp socket(s) to the cluster, then rotate the socket(s) clockwise to secure.
3. Align the cluster backing plate to the cluster, then carefully press into place to secure the retainers.
4. Install the IP cluster.