Wiper Motor Cover Replacement

REMOVE OR DISCONNECT
1. Air inlet screen from vehicle.
2. Connector (17) from wiper motor assembly (18).
3. Three screws (29) and wiper motor cover (30) from wiper motor assembly (18).

INSTALL OR CONNECT

NOTE: Refer to Fastener Notice in GENERAL INFORMATION.

1. Wiper motor cover (30) on wiper motor assembly (18) with three screws (29).

Tighten
^ Screws to 2 N.m (18 lb. in.).

2. Connector (17) to wiper motor assembly (18).
3. Air inlet screen on vehicle.
4. Operate wipers and check for proper operation.