Wiper Blade Assembly Replacement

Wiper Blade Assembly And Element Replacement:

REMOVE OR DISCONNECT
1. If wiper arm assembly (8) has not been removed, run wiper arm and blade assembly to mid-wipe position.
2. Lift blade retaining latch.
3. Blade assembly (11) from arm assembly.

INSTALL OR CONNECT

IMPORTANT
^ Use only 19-inch beam-type blade assemblies.
^ Blade assemblies must be installed with blade retaining latch pointed toward driver side of vehicle as shown in Figure 15.
1. Blade assembly (11) on arm assembly (8).
2. Park wipers if at mid-wipe position.