Fuel Pump Pickup Filter: Service and Repair

REMOVE OR DISCONNECT
1. Relieve fuel system pressure. Refer to Fuel Pressure Release.

2. Drain fuel tank. Refer to Fuel Tank Draining.

3. Remove the fuel tank. Refer to Fuel Tank Assembly.

4. Remove the fuel sender assembly. Refer to Fuel Sender Assembly Replacement.

5. Note strainer position for future reference.

6. Support the reservoir with one hand and grasp the strainer with the other hand.

7. Using a screwdriver to pry the strainer ferrule off the reservoir.

8. Discard the strainer.

INSTALLATION PROCEDURE

Notice: Numbers in text correspond to numbered components in image.

1. Install the new strainer (1) to reservoir.

2. Support the reservoir with one hand and grasp the strainer with the other hand twisting the strainer into position.

3. Install the fuel sender assembly.

4. Install the fuel tank.

5. Refill tank.

6. Check for fuel leaks.

6.1. Turn ignition to ON position for 2 seconds.

6.2. Then turn to OFF for 10 seconds.

6.3. Turn the ignition to ON position.

6.4. Check for fuel leaks.