Intermediate

TOOL REQUIRED
^ J 29800 Cut-Off Tool

NOTE: When replacing the intermediate pipe/resonator assembly on an originally equipped welded system, a service muffler will be needed.





REMOVAL
1. Support converter and muffler.
2. Intermediate pipe/resonator assembly hanger.
3. Cut pipe at converter and muffler using Cut-Off Tool.
4. Muffler hangers, intermediate pipe/resonator assembly and muffler.

INSTALLATION
1. Loose assemble muffler to intermediate pipe/resonator assembly and hangers using a "U" bolt type clamp).
2. Loosely assemble intermediate pipe/resonator assembly to converter using a "U" bolt type clamp).
3. Intermediate pipe/resonator assembly hanger.
4. Align system for proper clearances, then tighten pipe clamps, then tighten hanger fasteners. Tighten clamp nuts to 40 Nm (30 ft. lbs.).