4T60-E

LEFT MOUNT






Remove Or Disconnect
1. Raise vehicle and suitably support.
2. Support transaxle with jackstand(s).
3. Front splash shield.
4. Transaxle cooler line bracket.
5. Mount.

Install Or Connect
1. Mount into position.
2. Transaxle cooler line bracket.
^ Tighten:
- Mount to transaxle bolts to 63 Nm (46 ft. lbs.).
- Frame to mount nuts to 50 Nm (37 ft. lbs.).
3. Remove jackstand.
4. Splash shield.
5. Lower vehicle.

RIGHT MOUNT






Remove Or Disconnect
1. Raise vehicle and suitably support.
2. Support transaxle with jackstand.
3. Bolts attaching steering gear assembly to frame.
4. Nuts from frame to mount.
5. Bolts from mount to transaxle.
6. Mount.
^ Using a long screwdriver or prybar, pry up on steering gear assembly while working mount out from vehicle.

Install Or Connect
1. Mount into position.
2. Bolts, mount to transaxle.
3. Nuts, frame to mount.
^ Tighten:
- Mount to transaxle bolts to 52 Nm (38 ft. lbs.).
- Frame to mount nuts to 41 Nm (30 ft. lbs.).
- Frame to body bolts to 112 Nm (83 ft. lbs.).
4. Remove jackstand.
5. Five bolts attaching steering gear assembly to frame.
6. Lower vehicle.

TORQUE STRUT






Remove Or Disconnect
1. Raise vehicle and suitably support.
2. Support transaxle with jackstand.
3. Bolt attaching torque strut to torque strut bracket.
4. Bolts attaching torque strut to transaxle.
5. Torque strut.

Install Or Connect
1. Torque strut into bracket.
2. Bolts attaching torque strut to transaxle.
^ Tighten bolt to 55 Nm (41 ft. lbs.).
3. Bolt attaching torque strut to torque strut bracket.
4. remove jackstand.
5. Lower vehicle.

TRANSAXLE BRACE






Remove Or Disconnect
1. Raise vehicle.
2. Bolts.
3. Transaxle brace.

Install Or Connect
1. Transaxle brace.
2. Bolts.
^ Tighten bolts to 60 Nm (44 Ft. lbs.).