Stabilizer Shaft and Insulators

REMOVE OR DISCONNECT
1. Rear wheels and tires.
2. Stabilizer shaft link assembly bolt, nut, retainer and insulators from stabilizer shaft bracket.
3. Link bolt, and bend open end of link downward.
4. Stabilizer shaft and insulators.

INSTALL OR CONNECT
1. Stabilizer shaft and insulators. Install insulator into link with slit rearward.
2. Bend link upward to close around insulator, and install link bolt.
3. Link assembly insulators, retainers, support bolt and nut.
^ Tighten:
- Link assembly nut to 17 Nm (13 ft. lbs.).
- Link bolt to 23 Nm (17 ft. lbs.).
4. Wheels and tires.
^ Tighten wheel nuts to 140 Nm (100 ft. lbs.).