Bin Assembly

Description:

Remove or Disconnect
1. Lower side fasteners of console upper trim plate to I/P.
2. Lift trim plate from bottom and rotate upward to disengage tabs.
3. Transmission control lever handle.
4. Pry up on rear edges and sides of shifter trim plate and lift from console.
5. Electrical connector from PRNDL.
6. Fasteners from console to floor at side/rear of console.
7. Fasteners from console to I/P lower.
8. Fasteners from inside console at transmission control assembly.
9. Lift console and disconnect electrical connector at left front.
10. Console from Floor.

Install or Connect
1. Electrical connector.
2. Align console to transmission control assembly.
3. Fasteners to transmission control assembly.
4. Forward fasteners to I/P.
5. Rear fasteners to floor bracket.
6. Electrical connector to PRNDL.
7. Shifter trim plate to console.
8. Engage upper tabs of console upper trim plate into I/P and lower into position.
9. Side lower fasteners from trim plate to I/P lower.