Fluid Pick-Up: Service and Repair

REMOVE OR DISCONNECT
1. Negative battery cable.
2. Raise and support vehicle
3. Bottom pan and filter. Refer to CHANGING OIL AND FILTER.
4. Oil level control valve. Pull valve straight out do not pry on valve or transaxle.

INSTALL OR CONNECT
1. Oil level control valve into transaxle. Push straight on center of valve.
2. Oil filter and bottom pan. Refer to CHANGING OIL AND FILTER.
3. Lower vehicle.
4. Negative battery cable.

Adjust
- Oil level, refer to TRANSAXLE OIL LEVEL CHECKING PROCEDURE.