Fastener Tightening Specifications - On-Vehicle

Case Cover 24 Nm (18 lb ft)
Case Side Cover 28 Nm (21 lb ft)
Cooler Pipes At Case 8 Nm (71 lb in)
Cooler Pipes At Radiator 20 - 40 Nm (15 - 30 lb ft)
Converter Shield 10 Nm (18 lb ft)
Flywheel To Torque Converter 62 Nm (46 lb ft)
Lo/Reverse Servo Cover Bolts 12 Nm (9 lb ft)
Oil Check Plug 14 Nm (124 lb in)
Oil Pan To Case 14 Nm (124 lb in)
Transaxle Range Switch To Case 24 Nm (18 lb ft)
Shift Control Cable Grommet 2 Nm (14 lb in)
Shift Lever To Transaxle Nut 20 Nm (15 lb ft)
Speed Sensor Housing To Case 11 Nm (97 lb in)
Transaxle Mount To Cradle Assembly:
Front 120 Nm (89 lb ft)
Rear 66 Nm (49 lb ft)
Transaxle Mount To Engine Assembly:
Front 130 Nm (99 lb ft)
Left 130 Nm (99 lb ft)
Rear 130 Nm (99 lb ft)
Transaxle Mount (All) Through Bolts 120 Nm (89 lb ft)
Transaxle To Engine:
Brace 43 Nm (32 lb ft)
Mount Bolts 90 Nm (66 lb ft)