System Inspection

NOTE: It is important that the front of the radiator is kept clear for proper cooling.

Inspect the condition of all hoses and clamps. Hoses should be flexible and show no signs of bulging. Inspect hoses for cracks, cuts, kinks and areas of possible leaks. Inspect the brackets, supports, ties and clamps. Replace and adjust as needed. At least yearly, the front face of the radiator should be cleaned. Clean the front face of the condenser. It will collect any debris before the radiator will. Bugs, leaves, etc. can be removed by blowing compressed air through the radiator, from the rear toward the front of the vehicle. If compressed air is not available, a water hose can be used to force water through the radiator from the rear toward the front of the vehicle. Use water only with the engine not running and cool. The radiator fins are necessary for good heat transfer. They should not be brushed, as doing so damages the fins and reduces heat transfer.