Generator Rear Brace

Generator Rear Brace:

REMOVE OR DISCONNECT
1. Raise vehicle and suitably support.
2. Catalytic converter.
3. Generator cooling duct from generator and reposition for access.
4. Generator rear brace to engine nut.
5. Generator rear brace to generator bolt/screw.
6. Generator rear brace.

INSTALL OR CONNECT

Refer to Service Precautions.

1. Generator rear brace.
2. Generator rear brace to generator bolt/screw and generator rear brace to engine nut.

Important
^ Make sure tightening fasteners does not bind the generator.

Tighten
^ Bolt/screw to 25 N.m (18 lb. ft.).
^ Nut to 50 N.m (37 lb. ft).
3. Generator cooling duct to generator.
4. Catalytic converter.
5. Lower vehicle.