Front Door - Coupe and Sedan

POWER WINDOW SWITCH
Front Door - Coupe and Sedan

Power Window Switch Assembly:

NOTICE: When removing a door trim panel or switch plate, the ignition switch must be in the off position. This will eliminate the possibility of shorting out the switch if a screwdriver, awl or metal object is used to remove the switch from the harness.

REMOVE OR DISCONNECT
1. Mounting plate and switch from trim panel.
2. Electrical connector(s).
3. Switch from mounting plate.

INSTALL OR CONNECT
1. Switch tabs into mounting plate slots and snap in to secure.
2. Electrical connector.
3. Switch and mounting plate to trim panel by snapping in to secure.