General

CAUTION: Departure from these conditions or the procedure below could result In: (1) serious personal injury (particularly to eyes) or property damage from such causes as battery explosion, battery acid, or electrical burns; and/or (2) damage to electronic components of either vehicle.

NOTE: Do not push or tow the vehicle to start Damage to the emission system and/or to other parts of the vehicle may result. Both booster and discharged battery should be treated carefully when using jumper cables. Follow the procedure outlined below, being careful not to cause sparks.
^ Never expose battery to open flame or electric spark. Batteries generate a gas which is flammable and explosive.
^ Remove rings, watches, and other jewelry. Wear approved eye protection.
^ Do not allow battery fluid to contact eyes, skin, fabrics, or painted surfaces. Battery fluid (electrolyte) is a corrosive acid. Flush any electrolyte-contacted area with water immediately and thoroughly.
^ Be careful that metal tools or jumper cables do not contact the positive battery terminal (or metal in contact with it) and any other metal on the vehicle.
^ Turn the ignition "OFF" when connecting a booster battery or a battery charger.
^ Keep jumper cables away from pulleys fans, belts, and any moving parts.
^ Do not permit vehicles to touch each other as this could cause an undesired electrical connection and possible sparking.
^ Make sure all electrical accessories remain off until the booster battery is disconnected to avoid damage.