Fastener Tightening Specifications - Diagnosis

2-1 Manual Servo Cover Bolt 20.0 - 27.0 Nm (14.7 - 20.0 lb ft)
Ball Check Assembly Cooler 46.0 - 58.0 Nm (34.0 - 43.0 lb ft)
Bolt Channel Plate To Case 20.0 - 27.0 Nm (14.7 - 20.0 lb ft)
Case To Drive Sprocket:
Support Screw 20.0 - 27.0 Nm (14.7 - 20.0 lb ft)
Case Extension Bolt 30.0 - 41.0 Nm (22.0 - 30.0 lb ft)
Case Side Cover Nut:
Flanged Hex 5.0 - 11.0 Nm (45.0 - 97.4 lb in)
Channel Plate To Case Bolt 20.0 - 27.0 Nm (14.7 - 20.0 lb ft)
Cooler Connector:
Inverted Flared Tube 32.0 - 44.0 Nm (23.5 - 32.5 lb ft)
FWD Servo Cover Bolt 7.0 - 13.0 Nm (62.0 - 115.0 lb in)
Hex Flange Bolt Accumulator Cover:
And Housing 8.0 - 14.0 Nm (71.0 - 124.0 lb in)
Speed Sensor Bolt 8.0 - 14.0 Nm (71.0 - 124.0 lb in)
Manual Detent Spring To:
Channel Plate Special Bolt 8.0 - 14.0 Nm (71.0 - 124.0 lb in)
Manual Shaft To Detent Lever Nut 27.0 - 36.0 Nm (20.0 - 26.5 lb ft)
Metric Hex Bolt:
Structural Side Cover 20.0 - 27.0 Nm (14.7 - 20.0 lb ft)
Modulator Bolt 20.0 - 27.0 Nm (14.7 - 20.0 lb ft)
Oil Pan Bolt 9.0 - 13.0 Nm (80.0 - 115.0 lb in)
Pipe Plug (Line Pressure) 7.0 - 14.0 Nm (62.0 - 124.0 lb in)
Pump Cover To:
Valve Body Bolt 8.0 - 14.0 Nm (71.0 - 124.0 lb in)
Pump Body Bolt 20.0 - 27.0 Nm (14.7 - 20.0 lb ft)
Channel Plate Bolt 8.0 - 14.0 Nm (71.0 - 124.0 lb in)
Pump Body To Case Bolt 20.0 - 27.0 Nm (14.7 - 20.0 lb ft)
Screw And Conical Washer:
Assembly 9.0 - 13.0 Nm (80.0 - 115.0 lb in)
Structural Side Cover To:
Case Stud 20.0 - 27.0 Nm (14.7 - 20.0 lb ft)
Temperature Sensor 6.5 - 7.5 Nm (57.5 - 66.5 lb in)
Torx(R) Head Bolt:
Structural Side Cover 20.0 - 27.0 Nm (14.7 - 20.0 lb ft)
Valve Body To:
Case Bolt 20.0 - 27.0 Nm (14.7 - 20.0 lb ft)
Channel Plate Bolt 8.0 - 14.0 Nm (71.0 - 124.0 lb in)
Channel Plate Bolt (Torx) 8.0 - 16.0 Nm (6.0 - 12.0 lb ft)
Case Special Bolt 20.0 - 27.0 Nm (14.7 - 20.0 lb ft)
Case Bolt 20.0 - 27.0 Nm (14.7 - 20.0 lb ft)