Sunroof / Moonroof Module: Service and Repair

Sunroof Module:

Remove or Disconnect

1. Control switch.
2. Headliner.
3. Front and rear drain hose clamps.
4. Drain hoses from module.
5. Electrical connectors from relay and harness assembly.
6. Bolts/screws securing module support from roof rails.
7. Support assembly cables.
8. Slide module supports inboard to disconnect roof rails.
9. Nuts securing module to roof, lower and remove through passenger door opening with aid of helper. Remove center nuts last.

Install or Connect

1. Module assembly to roof. Secure installing center nuts first.

Tighten
^ Nuts to 10 N.m (89 lb. in.).

2. Slide module supports outboard to contact roof rails.
3. Bolts/screws securing module to support bracket.

Tighten
^ Bolts/screws to 10 N.m (89 lb. in.).

4. Bolts/screws securing module to roof.

Tighten
^ Bolts/screws to 10 N.m (89 lb. in.).

5. Electrical connectors to relay and harness assembly.
6. Front and rear drain hoses to module.
7. Drain hose clamps to hose.
8. Headliner.
9. Control switch.

Inspect
^ Window must be in the closed position. Check for pinched hoses. Adjust height and centering of window panel in sunroof opening as required.