With Keyless Entry

All Door Locks operate the same as without Keyless Entry except the LH Door Lock. When either Door Lock Switch is moved to the "LOCK" position, the Door Lock Relay is energized and voltage is applied to CKT 295 and to the Door Lock Actuators. The LH Front Door Actuator is grounded through the Remote Door Lock Control Receiver (RCDLR) (CKT 750). The other Door Lock Actuators are grounded through the normally open contacts of the Unlock Relay. When either Door Lock Switch is pressed to the "UNLOCK" position, voltage is applied to CKT 194 of the RCDLR (refer to Keyless Entry). This is the Unlock Enable signal that tells the Remote Door Lock Control Receiver to energize CKT 694, which then applies voltage to CKT 294 and to the LH Front Door Lock Actuator. The LH Front Door Lock Actuator is then grounded through CKT 295 to the Lock Relay of the Door Lock Relay and then to CKT 750. Keyless Entry