Oil Pump

^ Tool Required:
- J 28467-360 Engine Support Fixture
- Or Equivalent

REMOVE OR DISCONNECT
1. Negative battery cable.
2. Install engine support fixture, J 28467-360.
3. Raise vehicle and support.
4. Case side cover.





5. Wiring harness as needed.





6. Pump to valve body bolts.

Inspect
^ Oil pump.

INSTALL OR CONNECT
1. Pump to valve body.

NOTICE: Use a torque wrench to tighten the pump to valve body bolts. Do not exceed the torque specifications. If exceeded, the bolts may break.

2. Pump to valve body bolts.
3. Wiring harness.
4. Case side cover.
5. Lower vehicle.
6. Remove engine support fixture, J 28467-360.
7. Negative battery cable.

Adjust
^ Oil level.