Compressor/Condenser Hose

A/C Hose Routing And Service Port Locations - 2.4L:

A/C Hose Routing And Service Port Locations - 3.1L:

Tool Required:
J 39500 A/C Refrigerant Recovery, Recharging, and Recycling Station

Remove or Disconnect

1. Negative battery cable.
2. Recover refrigerant.
3. Wire connector from A/C pressure sensor.
4. Raise vehicle.
5. Line at condenser.
6. Line at evaporator.
7. Compressor/condenser hose from compressor.
8. Discard all the O-ring seals and sealing washers.

Install or Connect

1. Compressor/condenser hose at compressor using new sealing washers.
2. Hose to retainers.
3. Line at evaporator.
4. Lower vehicle.
5. Line at condenser using new O-ring seals.
6. A/C pressure sensor and wire connector.
7. Evacuate and recharge A/C system with 1.02 kg (2.25 lbs) of R-134a.
8. Leak test.