Alternator Rear Brace

Generator Mounting.:

REMOVE OR DISCONNECT
1. Raise and suitably support vehicle.
2. Exhaust converter assembly.
3. Generator cooling duct and reposition. Refer to "Generator Cooling Duct".
4. Generator rear brace retaining bolt and nut.
5. Generator rear brace.


INSTALL OR CONNECT
1. Generator rear brace.
2. Generator rear brace retaining bolt and nut.

^ Parts should fit easily. Tightening bolts and nuts MUST NOT put generator assembly in a bind.


Tighten
^ Generator rear brace bolt to 25 Nm (18 ft lb).
^ Generator rear brace nut to 50 Nm (37 ft lb).

3. Generator cooling duct. Refer to "Generator Cooling Duct".
4. Exhaust converter assembly.
5. Lower vehicle.