Gear Cover

Gear Cover






CAUTION: To help avoid personal injury, due to a retained load on the ABS hydraulic modulator, the gear tension relief function of the Tech 1 must be performed prior to removal of the ABS hydraulic modulator-master cylinder assembly.

NOTICE: The following service procedures shall be performed only after the ABS hydraulic modulator-master cylinder assembly has been removed from the vehicle. Do not perform these procedures with the unit installed on the vehicle. Complete overhaul of the ABS hydraulic modulator-master cylinder assembly is not authorized. These steps will break the unit down into major components for replacement purposes.

ABS Brake Modulator/Master Cylinder Assembly Components:

DISASSEMBLE

1. Torx head screws attaching gear cover.
2. Remove gear cover.

ASSEMBLE

1. Gear cover to Antilock Brake System brake modulator/master cylinder assembly.
2. Torx head screws.

Tighten

^ Tighten torx screws to 4 Nm (35 inch lbs.).