Power Steering Return Pipe

Power Steering Return Pipe

Remove or Disconnect

1. Raise the vehicle and suitably support.
2. Return line from cooler pipe.
3. Lower Vehicle.
4. Serpentine drive belt.
5. Return hose from pump.
6. Return pipe and hose assembly.

Install or Connect

1. return pipe and hose assembly.
2. Return hose to pump.
3. Serpentine drive belt.
4. Raise the vehicle and suitably support.
5. Return hose to cooler pipe.
6. Lower vehicle.
7. Bleed air from system. Inspect for leaks, if found correct as necessary.