Part 1

LOCK HOUSING COVER, COVER END CAP, PIVOT & PULSE SWITCH, DIMMER SWITCH ROD ACTUATOR & TILT SPRING

DISASSEMBLE
1. On models with cruise control, remove housing cover end cap, unplug connector and gently pull through bowl assembly, then remove multi-function lever.
2. On all models, remove cover screws and lock housing cover assembly.
3. Remove tilt lever, cover end cap and dimmer switch rod actuator.
4. Gently pull pivot switch harness through bowl assembly and column housing.
5. Remove pivot pin, pivot and pulse switch assembly, spring retainer, spring and spring guide.

ASSEMBLE
1. Install spring guide and spring coated with lithium grease.
2. Install spring retainer, pivot and pulse switch assembly and pivot pin.
3. Feed pivot and pulse switch assembly harness through column housing and bowl assembly and connect.
4. Install dimmer switch rod actuator to cover end cap.
5. Install cover end cap to lock housing cover assembly. Bottom edge of dimmer switch rod actuator should rest on bend in dimmer switch rod.
6. Install lock housing cover assembly.
7. On models with cruise control, gently pull connector through column housing and bowl assembly and connect, then install multi-function lever.
8. On all models, install lock housing cover assembly screws and torque to 80 lb in Screw in the 12 o'clock position first, 8 o'clock position second and the 4 o'clock position last.