Gear Cover

CAUTION: To help avoid personal injury, due to a retained load on the ABS hydraulic modulator, the gear tension relief function of the Tech 1 must be performed prior to removal of the ABS hydraulic modulator/master cylinder assembly. Refer to "Gear Tension Relief Sequence".

NOTICE: The following service procedures shall be performed only after the hydraulic modulator/master cylinder assembly has been removed from the vehicle. Do not perform these procedures with the unit installed on the vehicle. Complete overhaul of the hydraulic modulator/master cylinder assembly is not authorized only the following steps. These steps will break the unit down into major components for replacement purposes.

GEAR COVER

Hydraulic Modulator/Master Cylinder Assembly:

DISASSEMBLE
1. Torx head screws attaching gear cover.
2. Remove gear cover.

ASSEMBLE
1. Gear cover to hydraulic modulator/master cylinder assembly.
2. Torx head screws.

TIGHTEN
^ Torx screws to 4 Nm (36 lb. in.).