Lighted Rear View Mirror - Wires Visible
90oldsmobile11SUBJECT WIRE VISIBLE ON THE INSIDE REAR VIEW MIRRORS
(INSTALL WIRING COVERS)
MODELS/YEARS 1990 CUTLASS SUPREME
NUMBER: 90-T-166
CORP.REF.NO: 03104OR
DATE: September 1990
SECTION: 10-2
CONDITION:
Electrical wires to the lighted rear view mirror are visible when viewed from outside the vehicle.
CORRECTION:
To address this condition, install a new wire cover which is now available.
Sedans: P/N 10165667
Coupes: P/N 10165666
Parts are currently available from GMSPO.
PROCEDURE:
1. Loosen the mirror attaching screw and remove the mirror from the windshield.
2. Position the new cover over the mirror base and snap in place with wiring inside the cover channel.
3. Carefully insert the upper end of the cover under the front edge of the headliner.
4. Reinstall the mirror to the windshield and tighten the attaching screw.
5. Position the cover vertically from the mirror support to the headliner.
WARRANTY INFORMATION:
Labor Operation Number: T1649
Labor Time: 0.2 hour
Trouble Code: 92