Rear Door

POWER WINDOW AND DOOR SWITCH ASSEMBLY - SEDAN REAR DOOR

NOTICE: When removing a door trim panel or switch plate, the ignition switch must be in the OFF position. This will eliminate the possibility of shorting out the switch if a screwdriver, awl or metal object is used to remove the switch from the harness.

Power Switch Assembly - Sedan Rear Door:

REMOVE OR DISCONNECT
1. Switch assembly from trim panel by prying out with a flat bladed tool.
2. Retainers from connectors.
3. Connectors from switch plate assembly.

INSTALL OR CONNECT
2. Connectors to switch assembly.
3. Retainers to connectors.
4. Switch assembly to trim panel pressing firmly to secure.