Removal/Installation

Fig. 14 Power Steering Pump Mounting:

1. On models equipped with airbags, disable airbag system as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM DISARMING.
2. On all models, disconnect battery ground cable.
3. Disconnect hoses at power steering pump, then plug pump parts and hoses.
4. Loosen pump adjusting bolt and remove pump drive belt.
5. Remove pump to support bracket attaching bolts and the pump, Fig. 14.
6. Reverse procedure to install. Torque attaching bolts to specifications.
7. Rearm airbag system as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM DISARMING.