Headlamp Switch: Service and Repair

Fig. 10 Headlamp Switch Replace:

1. On models equipped with airbags, disable airbag system as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM DISARMING.
2. On all models, disconnect battery ground cable.
3. Remove lefthand sound insulator, steering column trim cover and headlamp switch knob.
4. Remove two screws attaching left side trim cover to cluster carrier, then remove trim cover by pulling rearward.
5. Remove two screws attaching mounting plate to cluster carrier, Fig. 10.
6. Pull switch and mounting plate rearward and disconnect electrical connector.
7. Remove nut and separate mounting plate from switch.
8. Reverse procedure to install.
9. Rearm airbag system as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM DISARMING.