Removal

REMOVAL

WARNING : To avoid personal injury when rotating the serpentine belt tensioner, use a tight fitting 13 mm wrench that is at least 61 cm (24") long. This operation can be done using J 37059.

Crankshaft Pulley:

1. Remove drive belt.
2. Raise the vehicle.
3. Remove right front tire and wheel assembly.
4. Remove right splash shield.
5. Remove balancer retaining bolt and washer using J 38122 or equivalent to prevent crankshaft rotation when loosening bolt.
6. Remove balancer assembly using J 24420-B or equivalent.