Identification Label and Parts Information

CAMPAIGN IDENTIFICATION LABEL

Each label provides space to print the campaign number, and the five (5) digit dealer code of the dealer performing the campaign. Insert this information with a typewriter or ballpoint pen. When installing label, clean and dry the surface of the radiator support tie bar and apply the campaign label where it is readily visible.


PARTS INFORMATION

To ensure parts are obtained as soon as possible, order them from GM Service Parts Operations (GMSPO) on a C.I.O. order, with NO special instruction code, but order on an Advise Code (2). Use the following part numbers:


IF A GUIDE LOOP IS NOT CRACKED:

Description Part Number Quantity Per Vehicle

Guide Loop Nut 10115018 2

(Guide Loop Nuts are serviced in merchandized packages of 6)


NOTICE:
DO NOT REUSE GUIDE LOOP NUT (P/N 10115018) UNDER ANY CIRCUMSTANCES.


IF A GUIDE LOOP IS CRACKED:

Description Part Number Quantity Per Vehicle

Guide Loop Reinforcement Kit 10216391 1 kit


Kit consists of:

Guide Loop Nut 10115018 2
Reinforcement 10216392 2
Instruction Sheet 10216393 1


NOTICE:
DO NOT REUSE GUIDE LOOP NUT (P/N 10115018) UNDER ANY CIRCUMSTANCES.

It is anticipated that less than 3% of the vehicles (one in thirty vehicles) will require the guide loop reinforcement kit to complete this campaign. Please order parts accordingly.

During the early stages of this product safety campaign, GMSPO may restrict the number of kits which may be requested on any one order due to available parts quantities.