Manual Seat Adjuster - Lateral Movement
85olds4SUBJECT MANUAL SEAT ADJUSTER LATERAL MOVEMENT NUMBER: 84-T-22A
DATE: May 13, 1985
MODELS/YEARS 1983-84 FIRENZA
SECTION: 10
This bulletin is being reissued to provide part numbers for the passenger side OUTER adjusters.
If a lateral movement of the inner seat adjuster is experienced, perform the following operations:
1. Remove seat and place on a clean protected surface.
2. Replace seat adjuster(s) with new adjuster(s).
Part Number Description
20329374 Passenger's Outer (Coupe)
20329375 Passenger's Outer (Sedan)
20162884 Passenger's Inner (Coupe)
20162885 Passenger's Inner (Sedan)
20330804 Driver's Inner (Coupe)
20330805 Driver's Inner (Sedan)
3. Install release wire (part no. 20162898) between lock bars.
4. If the adjuster-to-floor attaching stud is loose in the floor, weld the stud (mig or gas with steel rod only) into place using standard body shop repair procedure for structural components.
5. Install seat to floor and tighten seat adjuster-to-floor pan attaching nuts 20 to 28 N-m (15 to 21 ft.lbs.).
WARRANTY INFORMATION
Add .5 hour per side to the published operation number if stud requires welding.