Front

CL25VD (Front):

REMOVAL
1. Connect the vinyl tube to the air bleeder.
2. Depress the brake pedal and drain the brake fluid gradually from the air bleeder.





3. Remove connecting bolt and torque member fixing bolts.
4. Remove the brake caliper, using power tool.

INSTALLATION

CAUTION:
- Refill with new brake fluid "DOT 3".
- Never reuse drained brake fluid.

1. Install the brake caliper.
2. Install all parts and secure all bolts.

CAUTION: When installing the caliper assembly in the vehicle, wipe oil from the seating surface of the knuckle spindle washer and the mounting surface of the caliper assembly.





3. Install brake hose to caliper securely.

CAUTION:
- The copper washer of the connecting bolt has to be replaced every time the fitting is disconnected.
- Correctly attach the brake hose to the projecting portion of the cylinder body.

4. Bleed air. Refer to Brake Bleeding; Service and Repair.