Cylinder Head

Apply oil to the thread portion and seat surface of cylinder head bolts and tighten cylinder head bolts with washers.

Tightening procedure

1st Tighten all bolts to 29 Nm (3.0 kg-m, 22 ft-lb)
2nd Tighten all bolts to 69 Nm (7.0 kg-m, 51 ft-lb)
3rd Loosen all bolts completely
4th Tighten all bolts to 29 Nm (3.0 kg-m, 22 ft-lb).
5th Tighten all bolts to 69 to 74 Nm (7.0 to 7.5 kg-m, 51 to 54 ft-lb) or if you have an angle wrench, turn each bolt clockwise the specified number of degrees.

Specified number of degrees.
Bolts A 45-50
Bolt B 55-60
Bolts C 40-45