Cruise Control - Surging Upon Engagement

TS84-096
July 30, 1984
Engine Electrical
AUTOMATIC SPEED CONTROL DEVICE

(ASCD) SURGING, 1984 200SX

APPLIED MODEL: 1984 200SX With ASCD

APPLIED PRODUCTION DATE: March 18, 1984

SERVICE INFORMATION

Some 1984 200SX models equipped with ASCD and manufactured prior to the applied Production date above, may exhibit slight surging when the speed control is engaged. This surging will be felt, but may not register on the speedometer or tachometer. To correct this condition, adjust the tension of the ASCD wire. If surging continues, replace the ASCD control unit with the current production ASCD control unit listed in the following Parts Information.

SERVICE PROCEDURE



ASCD WIRE TENSION ADJUSTMENT

1. Tighten ASCD wire with adjusting nut until clearance between portion A of the throttle lever and the ASCD lever is 0.8 to 0.9mm (0.32 to 0.36 in) (Figure 1).

2. Securely tighten lock nut to hold adjusting nut in place.



REPLACEMENT OF ASCD CONTROL UNIT

1. Remove ASCD control unit from behind the kick panel, driver's side (Figure 2).

2. Replace the ASCD control unit with a new, appropriate ASCD control unit (see Parts Information below).
PARTS INFORMATION


PART NUMBERS

PART NAME APPLICATION FORMER NEW

ASCD 1984 5-speed (non-turbo) 18930-07F10 18930-07F16
Control 1984 Auto (non-turbo) 18930-07F10 18930-07F11
Unit 1984 5-speed (turbo) 18930-07F05 18930-07F06


WARRANTY INFORMATION

CS PNC CT OP CODE FLAT RATE

4Q 28402 91 PN22AAA 0.4/hr.