| Generator drive belt vibration frequency | When checked | Standard value | 144 - 176 Hz |
| When a used belt is installed | Standard value | 153 - 169 Hz |
| When a new belt is installed | Standard value | 203 - 227 Hz |
| Generator drive belt tension | When checked | Standard value | 392 - 588 N |
| When a used belt is installed | Standard value | 441 - 539 N |
| When a new belt is installed | Standard value | 785 - 981 N |
| Generator drive belt deflection (Reference value) | When checked | Standard value | 8.7 - 11.4 mm |
| When a used belt is installed | Standard value | 9.2 - 10.6 mm |
| When a new belt is installed | Standard value | 5.7 - 6.9 mm |
| Power steering oil pump and A/C compressor drive belt vibration frequency | When checked | Standard value | 137 - 168 Hz |
| When a used belt is installed | Standard value | 145 - 160 Hz |
| When a new belt is installed | Standard value | 174 - 199 Hz |
| Power steering oil pump and A/C compressor drive belt tension | When checked | Standard value | 392 - 588 N |
| When a used belt is installed | Standard value | 441 - 539 N |
| When a new belt is installed | Standard value | 637 - 833 N |
| Power steering oil pump and A/C compressor drive belt deflection (Reference value) | When checked | Standard value | 9.6 - 12.4 mm |
| When a used belt is installed | Standard value | 10.2 - 11.6 mm |
| When a new belt is installed | Standard value | 7.2 - 9.0 mm |
| A/C compressor drive belt tension | When checked | Standard value | 392 - 588 N |
| When a used belt is installed | Standard value | 441 - 539 N |
| When a new belt is installed | Standard value | 637 - 833 N |
| A/C compressor drive belt deflection (Reference value) | When checked | Standard value | 4.6 - 6.2 mm |
| When a used belt is installed | Standard value | 5.0 - 5.7 mm |
| When a new belt is installed | Standard value | 3.4 - 4.3 mm |
| Basic ignition timing at idle | | Standard value | 5 deg BTDC +/- 3 deg |
| Actual ignition timing at curb idle | | Standard value | Approximately 10 deg BTDC |
| CO contents | | Standard value | 0.5% or less |
| HC contents | | Standard value | 100 ppm or less |
| Curb idle speed | | Standard value | 700 +/- 100 r/min |
| Intake manifold vacuum at curb idle | | Limit | Minimum 60 kPa |
| Cylinder head bolt shank length | | Limit | 103.2 mm |