Hydraulic Assembly: Service and Repair

CAUTION:
1. The hydraulic unit is heavy, and so care should be taken when removing it.
2. The hydraulic unit is not to be disassembled, its nuts and bolts must not be loosened.
3. The hydraulic unit must not be dropped or otherwise subjected to impact shocks.
4. The hydraulic unit must not be turned upside down or laid on its side.

Installation service point
>A< Brake Pipe Connection

Connect the pipes to the hydraulic unit as shown in the illustration.
1. To the proportioning valve (LH Rear)
2. To the proportioning valve (RH Rear)
3. From the master cylinder (primary)
4. From the master cylinder (secondary)
5. To the front brake (LH)
6. To the front brake (RH)